Porting CWM to MTK devices is quite easy. All you need to are
A Windows PC, preferably, Windows 7
MTK Droid Tools. You can download it here
ADB Drivers or PdaNet for PC (pda seems easier to use), you can download PDANethere
First of all, make sure your phone is rooted a with SuperUser installed. Go to Setting>developers option on your phone and enable USB Debugging
Steps to Port CWM to your MTK Device
1. Install PdAnet on your Pc. During the course of installation, PDAnet will require you to connect your phone, so make sure USB Debugging is activated and select USB mode when you plug your phone. When PDAnet prompts you for phone type, just select others and follow the on-screen instructions. This will enable you phone drivers to be installed to your PC
2. After that, extract the MTK Droid tools to a desktop or anywhere you wish on your PC, open the folder and run MTK Droid Tools. Connect your phone, it will be detected by MTK Droid tools.
3. Once your phone has been detected, click on Root below the screen. Droid tools will attempt to connect to your phone through your Superuser, just click allow on your phone. Wait till the process finish, a yellow dot at the bottom of the screen will change to green. (click yes to all screen prompts)
4. At this stage, you can decide to take a full backup of your stock Rom before you flash CWM or just proceed to flashing CWM directly.
* To backup your ROM, click on the root, backup, recovery tab on the screen. You will see a backup button. Beside it, you will see a backup user data and cache option, tick it. Click on the backup button and wait for the backup to be completed. (click yes to all screen prompts)
*If you don�t want to take a backup, go to step 5.
5. Under root, backup and recovery tab, in the Recovery and boot section, tick �to use boot.img on phone�. Then click on �Recovery and boot�. It will start the flashing process. Click yes to all screen prompts until the process finish. Once it is completed, it will boot your phone into recovery.
Just disconnect, and Voila, you now have CWM on your phone
Disclaimer: Following the above steps is at your own risk, we shall not be held responsible for any loss or damage done to your phone in the course of following this tutorial.
hello freind today i am telling about how to port rom with our android mobile. so star this guide is only for MTK! This will work from same chip to same chip for example MT6582 to MT6582 or MT6577 to MT6577. To port Custom ROM, all you need to have is a device with same SoC and it�s Custom ROM with your own Stock ROM.
Requirements to Port Custom ROM to your MTK device:
* A Custom Recovery
* Custom ROM
* Your Stock ROM
NOTE:- some devices have different partitions to flash and the ROM you might flash can brick your phone. It can even hard brick your phone. So it is recommended that you do a ReadBack, ClockWorkMod Backup and MTK Droid Root & Tools backup. This tutorial [Port Custom ROM to your MTK phone] is 100% working, but still we won�t take the GUARANTEE what happens to your device
HAT YOU NEED TO PORT CUSTOM ROM TO YOUR DEVICE [YOUR CHIPSET TO YOUR CHIPSET ONLY]
* A ROM to port [in .zip].
* Your stock ROM [extracted with /system and build.prop].
GUIDE TO PORT ROM WITH YOUR ANDROID MOBILE
* Extract the ROM to port and you will have these main things:
META-INF
System
boot.img
* If you have them then you are ready for next step.
* Open /system folder of stock and rom to port.
* Open bin folder of stock ROM and copy these files:
pq
vold
* Now replace these files in ROM to Port�s /System/Bin folder.
* Open lib folder of Stock ROM and get these files:
libcamalgo.so
libcamdrv.so
libcameracustom.so
libdpframework.so
libsensorservice.so
libsync.so
libvcodecdrv.so
* Replace all the files mention above to ROM to Port�s /system/lib folder.
* Now open Stock ROM�s /system/etc/ folder and copy these files:
apns.conf.xml
vold.fstab
vold.fstab.nand
* Now replace these files in ROM to port�s /system/etc folder.
* Delete these folders from ROM to Port:
/System/vendor/
/System/lib/hw
/System/lib/modules/
/System/etc/WiFi
/System/etc/Firmware
* Replace these folders from Stock ROM to ROM to Port:
/System/lib/hw/
/System/lib/modules//System/etc/WiFi/
/System/etc/Firmware/
/System/vendor/
* The final step! Press back button to go to the main folder where you have the Stock ROM. Copy boot.img [From Stock ROM]and replace it with the ROM to Port�s.
Guyz here presenting easy guide for porting for mtk6572-mtk6572...credits me and ravinder singh bro....
---------NOW ANYONE CAN PORT----------
Things needed:-
1.Universal fixer or patch(link in description)
2.Pc(u can do it without pc but its little complicated)
3.Rom you want to port(be sure its mtk6572 and jb base)
4.last thing and most important little brain :p
Few tips = 1.Use pc 2.before porting rom check a thing...extract rom...go to meta-inf folder...and then updater-script check there is mmkclp...if ubifs is there thn u cant port....
Now lets start :-
Download universal fixer link :- http://d-h.st/3RA1 (credits -- ravinderbro)
How To Install AOKP 2 1 Android Nougat 7 1 2 On Samsung Galaxy On7 j5 PORT stock rom go to rompure com
How To Install AOKP 2.1 Android Nougat 7.1.2 On Samsung Galaxy On7 [j5 PORT]
AOKP 2.1 Android Nougat 7.1.2 On Samsung Galaxy On7
Finally We got AOKP 2.1 Android Nougat 7.1.2 Rom For our Samsung Galaxy On7. In this post I am going to teach you How to download and install AOKP 2.1 Android Nougat 7.1.2 ROM On Samsung Galaxy On7. Here comes the AOKP 2.1 Rom for Samsung Galaxy on7 via an unofficial build. This is a Rom ported by a RV Techno Tutorials. This Samsung Galaxy On7 AOKP 2.1 Android Nougat 7.1.2 Rom is brought to you by RV Techno Tutorials.
Samsung Galaxy On7 / on7 Pro :
Samsung Galaxy On7 / on7 Pro SM-G600FY
Building on the budget line-up, Samsung released the Galaxy On7 in November 2015. Featuring a 5.5� 720P TFT LCD display, with a pixel density of ~267 PPI. Processing power is supplied curtesy of a Qualcomm Snapdragon 410 chipset, which utilises a 1.2 GHz quad-core CPU, an Adreno 306 GPU and 1.5 GB of system RAM. The Galaxy On7 ships with a low 8 GB of internal storage, which thankfully can be expanded upon with the use of a microSD card. The primary camera captures images at 13MP, and the secondary at 5 MP. Power is supplied by a removable 3000mAh battery. Here members are free to browse the existing threads available for the Samsung Galaxy On7, or request general support for their device.
What Is AOKP ROM??
AOKP stands for Android Open Kang Project. It is a custom ROM distribution for several high-end Android devices. The name is a play on the word kang and AOSP (Android Open Source Project). The name was sort of a joke, but it just stuck, just like our infatuation with unicorns.
We fork the source code of Android that Google puts out in the open with every major version release, and we then add the magical unicorn bytes (read: we add some of the coolest features that are both useful and make your ROM awesome).
With AOKP, you can generally do a lot more with your device than what you could do with the original firmware that came installed on it.
ALLSO READ : How To Install Unofficial Lineage OS 14.1 On Samsung Galaxy On7 / Pro (NOUGAT)
Donate
If you like RV TechnoTutorials (Rom Devloper) work then Donate.
WHATSAPP GRUP
DISCLAIMER:
If You Do Wrong Steps Then You Brick Your Device So I AM NOT RESPONSIBLE FOR ANY DAMAGES OF YOUR PHONE DO DO IT AT YOUR OWN RISK.
ALLSO READ : How To Install Android Nougat 7.1.2 On Samsung Galaxy On7 SM G600FY [AOSP ROM]
Supported Devices :
Samsung Galaxy On7 (SM-G600FY)
Samsung Galaxy On7 Pro (SM-G600FY)
Status of AOKP 2.1 Rom For Samsung Galaxy On7 :
WHAT�S WORKING:
� Not Known
KNOWN ISSUES:
� Not Known
Requirements For Installing a AOKP 2.1 ROM on a Samsung Galaxy On7 SM-G600FY
1. Need Latest custom Recovery installed (Like CWM OR TWRP). If you dont know how to install custom recovery on your Samsung Galaxy On7 SM G600FY, then watch this video tutorial or follow the post link.
2.AOKP 2.1 Android Nougat 7.1.2 Rom for Samsung Galaxy On7 zip file. (Download this file from the link given below).
ALLSO READ : How To Install MIUI 8 On Samsung Galaxy On7 SM G600FY [j5 PORT]
3. Gapps For AOKP 2.1 Rom (Arm) (Download from the given links below)
How To Install AOKP 2.1 ROM In Samsung Galaxy On7 SM G600FY :
1. First take a full backup of your current rom in to your pc.
2. Download AOKP 2.1 Rom for Samsung Galaxy On7 zip file and Download Gapps for AOKP 2.1 rom from the given links on your pc.
3. Boot your phone into recovery mode using key combinations like Turn off your Samsung Galaxy On7 Phone and press Volume up + Home key + power key At the same. When the samsang logo spear release the keys.
4. Go to Wipe section and Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition.
5. Now move your files from the pc AOKP 2.1 Rom file and Gapps)
6. Now go to install section and select AOKP 2.1 rom file and flash it. It will take some time to flash.
7. After flashing rom dont reboot your phone. So go back and again go to install option and select Gapps zip file and flash it.
8. Now reboot your phone. It will take some time to first hoot.(5-10 minuts)
. 9. Now finally AOKP 2.1 Android Nougat 7.1.2 installed on your Samsung Galaxy On7.
9. Done & Enjoy.
ALLSO READ : How to Root Samsung Galaxy On7 (SM-G600FY) 6.0.1
How To Root AOKP 2.1 ROM :
1. Download Supersu zip file from the given link.
2. Flash supersu zip file from the TWRP Recovery.
. 3. Done. Now your AOKP 2.1 Android Nougat 7.1.2 Rom is successfully Rooted.
Download AOKP 2.1 ROM zip file & Gapps Zip & Supersu zip For Samsung Galaxy on7 (SM-G600FY)
Download Rom File:
LINK - 1:
LINK - 2:
Download Gapps File:
LINK - 1:
LINK - 2:
Supersu zip File:
LINK - 1:
LINK - 2:
Thank You For Reading How To Install AOKP 2.1 Android Nougat 7.1.2 On Samsung Galaxy On7 [j5 PORT].
