Showing posts with label oxygen. Show all posts
Showing posts with label oxygen. Show all posts
Friday, December 15, 2017
How to Install and Download Oxygen OS 3 5 5 Android Nougat On OnePlus 3
How to Install and Download Oxygen OS 3 5 5 Android Nougat On OnePlus 3
OnePlus has now stepped into upgrading its flagship phone OnePlus 3 with a new community build Oxygen OS 3.5.4 and many new features. This is followed by the community build for the OnePlus X that was released just this week with Oxygen OS version 3.1.0 based on the latest Android 6.0.1 Marshmallow.
We would have wished Oneplus has brought us Android 7.0 Nougat firmware or just some of its features. However, it may take some time for the development team to release it at this moment. So Oxygen OS 3.5 is still based on the stable Android 6.0.1 Marshmallow. Though, it comes with a newer AOSP source; most likely August 1. OnePlus has also promised Android 7.0 nougat for OnePlus 3 and OnePlus 2.
We would have wished Oneplus has brought us Android 7.0 Nougat firmware or just some of its features. However, it may take some time for the development team to release it at this moment. So Oxygen OS 3.5 is still based on the stable Android 6.0.1 Marshmallow. Though, it comes with a newer AOSP source; most likely August 1. OnePlus has also promised Android 7.0 nougat for OnePlus 3 and OnePlus 2.
Download Oxygen OS 3.5.5+ update for OnePlus 3
Signed full ROM zip file
This is the OTA and full firmware package unified:
- Oxygen OS 3.5.5 full ROM file ? Direct download (1.41 GB)
- Oxygen OS 3.5.4 full ROM file ? Direct download (1.3 GB)
- Oxygen OS 3.5.3 full ROM file ? Direct download
- Oxygen OS 3.5.2 full ROM file? Direct download
- Oxygen OS 3.5.1 full ROM file? Download (1.34 GB)
- Oxygen OS 3.5.0 full ROM file? Download (1.34 GB)
Note: If you flash this community build, you�ll continue receiving the community over-the-air (OTA). However, you won�t receive the official ones. For that, you�ll need to manually flash (restore back to stock) back to the official builds to continue receiving official OTAs. Roll back to official Oxygen OS version may require you to wipe data, cache, etc.
- Check out the above link (full rom file). It will do.
How to Install Oxygen OS 3.5.5 Community Build on OnePlus 3 via ADB sideload and stock recovery?
The following tutorial will let you flash the latest Oxygen OS 3.5.5+ community build onto your precious OnePlus 3 device. Before you proceed, make sure your device runs on previous community build OxygenOS 3.5.5. The following tutorial consists of 2 methods to install the ROM. One is via stock recovery and other via ADB sideload (OTA update).
For non-rooted devices: flash adb sideload
Flash the OTA using ADB sideload method. This is the manual method for installing the OTA zip file on most of the Android devices.
Prerequisites:
1. Verify your device for compatibility. The listed firmware is compatible with OnePlus 3 device only.
2. Enable USB Debugging on your device. To do so, go to Settings>About Phone> Tap on the Build Numberseveral times until you get a new Developer Options in the Settings. Open Developer Options and enable USB Debugging from there. Trust the connection by allowing it when you connect it to your PC for the first time.
3. Make sure you have latest device drivers setup on your PC for a better connection. Get it from the official page of your device manufacturer.
4. For ADB and Fastboot download the quick ADB and Fastboot Installer from here for Windows users and easily setup ADB and Fastboot on Mac OS, Linux or Chrome OS from here.
Installation Instructions:
Step 1: Download the OTA/Full ROM file for Android Watch. You don�t need to extract the file, just place the file on your PC where you can easily locate it.
Step 2: Make sure that you setup ADB and Fastboot on your PC. Trust the connection by checking �Always allow from this computer� when you plug in the Android device to your PC for the first time.
Step 3: Now keep the device plugged in and open a command prompt or terminal on your PC. To do so, hold the shift key on the keyboard and right-click on an empty space and select �Open command window here� option to launch a cmd window.
Step 4: Boot your Android device into the bootloader or Fastboot mode. To do so, issue the following command through cmd or terminal.
adb reboot bootloader
Note: To check your connectivity, issue the command �adb devices� before the bootloader command.
Step 5: Now, navigate to the location where you have placed the OTA file on your PC. (You may rename the OTA file to a simple one, like ota.zip. While the folder with the ota.zip file is open, flash the OTA by issuing the following command.) It is recommended you leave the name of OTA as it is and type the exact name with its proper extension.
adb sideload ota.zip
Step 6: Here, ota.zip is the name of the file. So use, adb sideload <file name>.zip Now the OTA will start installing.
Once the installation completes, you can now enjoy your new firmware.
How to Root OnePlus One and Install Oxygen OS
How to Root OnePlus One and Install Oxygen OS
How to Root OnePlus One and Install OxygenOS
The OxygenOS is now officially released for OnePlus One and can be installed on it by applying some sort of steps. Additionally, there must be many users who are not acquaint with the process of doing so. Therefore, today I am going to share a guide with you guys which will be making you learn that, How to root Oneplus One and install OxygenOS?
OnePlus One is one of the best Android smartphones released in the year 2014 and it continues to dominate the smartphone market with its high-end configuration and smarter pricing. Recently OnePlus has released the Oxygen OS (which is based on Android 5.0 Lollipop operating system) for all the OnePlus One devices. You can get it via automatic update in the next few months but if you don�t wait that long, then you are in the right page. Here, I have given a step by step tutorial to install Oxygen OS in OnePlus One Android smartphone. Follow the instructions carefully and enjoy the Oxygen OS ROM features today.
How to Root OnePlus One and Install OxygenOS
Prerequisites:
1) Before getting started with the installation of Oxygen OS, make sure that you have taken a complete backup of all the data in your smartphone using appropriate apps as Oxygen OS installation process will wipe out all your smartphone data. After installing the Oxygen OS, you can recover the data by using this backup.
Caution: Backup your OnePlus One before applying these steps.
Step 1) Root and Unlock Bootloader OnePlus One
The first steps of this guide is to root and unlock bootloader OnePlus one in order to install OxygenOS on your device. The steps for rooting and unlocking bootloader OnePlus is completely mentioned below. Additionally, I am again emphasizing you to backup your phone before applying the steps in order to be on the safe side.
- First of all, Install the ADB and fastboot file on your computer from this Link, and then extract it on the desktop as it will be a rar file.
- Now, turn off your phone and then Press Volume up and power button then you will be welcomed into fastboot mode.
- After that, connect your OnePlus one to your computer using USB cable and then go to the folder where you have installed the ADB and fastboot file on your computer and right click on it and then click onOpen Command Window here.
- Furthermore, you will have command prompt window, Now you need to write the following command there and then it will list all the connected device with your computer. If it is not showing OnePlus One then that means your phone�s driver is not installed.
fastboot devices
- After that, run the following command to unlock the bootloader.
fastboot oem unlock
- After you have run the above command then run the following command.
fastboot reboot
- Now, your phone will be rebooted in few minutes.
- Afterwards, you need to go to Settings >> About Phone >> then tap on Build no 7 and it will enable the developer mode.
- Now, again go to Settings >> Developer Options >> then enable USB Debugging.
- Furthermore, again go to Settings >> Developer Options and then toggle off/disable the Update Recovery with System Updates.
Step 1.1) Installing TWRP
- First of all, Install TWRP recovery program on your computer by Clicking Here.
- Ones it is downloaded, rename it as recovery.img and then copy that file and paste it into the ADB and fastboot folder which you�ve downloaded in above step.
- Now you need to turn off the phone and then Press Volume Up and Power button to enter into fastboot mode.
- Then you need to open new Command Prompt on your computer and then run the following command
fastboot flash recovery recovery.img
- After running the above command then run the following command.
fastboot reboot
- Now, it will reboot your phone and ones it is restarted then it will install the TWRP on your OnePlus One.
Step 1.2) Root Oneplus One
- Now, you need to Download SuperSU on your computer from this Link then move that file to your phone.
- Afterwards, enter the Recovery mode by pressing Volume Down and Power button on your phone.
- Then you need to go to Install and browse the SuperSU file which you�ve recently downloaded, select that file to install and then swipe to confirm the installation.
- After that, tap on Reboot and now your OnePlus one is successfully rooted.
Step 2) Installing OxygenOS
This is the second and the last step of this tutorial in which you are supposed to install OxygenOS. Ones you have followed all the above steps correctly then you are ready to go for this last step. Now, get to the below steps to know more about it.
- After following the above steps you need to install the OxygenOS file on your computer by ClickingHere.
- Now you need to extract that file on your computer as it is a zip file. You will have two different files on the folder, we need only .zip file.
- Then turn off your phone and then Press Volume Down+Power button to enter into the recovery mode.
- Afterwards, you�ll be welcomed in Recovery Mode. Now select Wipe option and Delete Dalvik Cache, Cache and Data.
- Then you need to go back and tap on Install button and then browse the .Zip file which you�ve downloaded in above step and then select OxygenOS zip file and confirm the installation process.
- After getting succeed message you need to turn off your device and then it will successfully install the OxygenOS on your phone.
- Enjoy using it!
Friday, December 1, 2017
How to Install Oxygen OS 3 0 2 Marshmallow Update on OnePlus 2 Using Stock Recovery
How to Install Oxygen OS 3 0 2 Marshmallow Update on OnePlus 2 Using Stock Recovery
OnePlus Community is now rolling out the official Oxygen OS 3.0.2 build for the public. The manufacturer promised another update to the OnePlus 2 device for its community build Oxygen OS 3.0.1 that was released a couple of weeks ago.
This new update brings many new features, software tweaks, stability improvements and of course, the latest Android 6.0.1 Marshmallow firmware upgrade. Improvements to the camera, audio, user interface and some system-wide stability have been brought with this update. OnePlus development team has also promised that the OTA will be available and start hitting the devices all across the globe in the next 48 hours.
This new update brings many new features, software tweaks, stability improvements and of course, the latest Android 6.0.1 Marshmallow firmware upgrade. Improvements to the camera, audio, user interface and some system-wide stability have been brought with this update. OnePlus development team has also promised that the OTA will be available and start hitting the devices all across the globe in the next 48 hours.
Download Official Oxygen OS 3.0.2 For OnePlus 3
- OnePlus 2 Oxygen 3.0.2 OTA ? Direct Download | Mirror1 | Mirror2
- OnePlus 2 Oxygen 3.0.2 Full Firmware zip Files ? Download
How to Install Oxygen OS 3.0.2 on Oneplus 2 Device and Update to Android 6.0.1 Marshmallow
Step 1. Before you proceed, make sure you have installed the base update prior to v 3.0. That means make sure you have Oxygen OS v2.2.0 or higher as you current firmware version.
Step 2. Now download the Oxygen OS 3.0 update zip file from the downloads and transfer it to your phone�s internal storage.
Step 3. Now boot your OnePlus 2 into Recovery Mode. To do so, turn off your device completely and then press and hold the power button and volume down key for a few seconds. Select Recovery if an option is available to get into stock recovery mode.
Step 4. Once into the Stock Recovery Mode, Select Apply Updates from phone�s storage and then navigate to the OTA zip file and select it.
Step 5. Confirm the operation and the installation process will begin updating your OnePlus 2. This may take a few minutes.
Step 6. When the installation completes, it will automatically reboot. If not, go back and reboot manually.
Step 2. Now download the Oxygen OS 3.0 update zip file from the downloads and transfer it to your phone�s internal storage.
Step 3. Now boot your OnePlus 2 into Recovery Mode. To do so, turn off your device completely and then press and hold the power button and volume down key for a few seconds. Select Recovery if an option is available to get into stock recovery mode.
Step 4. Once into the Stock Recovery Mode, Select Apply Updates from phone�s storage and then navigate to the OTA zip file and select it.
Step 5. Confirm the operation and the installation process will begin updating your OnePlus 2. This may take a few minutes.
Step 6. When the installation completes, it will automatically reboot. If not, go back and reboot manually.
Subscribe to:
Posts (Atom)