Updating the firmware version of you mobile phone is a very important operation to stay up to date with any new firmware error fixing and bug repairing, And the Samsung S7710 Galaxy Xcover 2 firmware update process is a most wanted one too, So you can do the job by yourself without waiting or buying any expensive tool at all, In this guide we used a very simple steps to perform this update, So all you have to do is reading, Understanding and applying.
Things you should do before updating:
- Backup your mobile phones data, Read our online guide to performe it (How To Backup Your Samsung Device).
- Make sure to charge your phone battery to be at least at 90% of charging level.
- Check your current firmware version and write it down, It will be very helpful info in case something goes wrong.
Downloads:
- Official Firmware Package for Samsung S7710 Galaxy Xcover 2 (Download and extract)
- Odin flasher (Download and extract).
- USB Drivers for Samsung S7710 (Download and install, Then restart the Computer).
Tools:
- Suitable USB cable for Samsung S7710 model.
- A computer running Windows OS.
Samsung S7710 Galaxy Xcover 2 Firmware Update Stpes:
- Turn off the phone and take out any SIM card or memory card.
- Run Odin.exe program.
- Check these options: Re-Partition, Auto Reboot, F.Reset Time.
- Click PIT button and select: skomerxx_121217.pit
- If you have a complete firmware package of Samsung S7710 then you will see 2 files inside (PDA + CSC):
Click PDA button and select: CODE_S7710xxxxxx_..._REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_Oxx_S7710Oxxxxxx_..._REV00_user_low_ship.tar.md5
- Put your Samsung S7710 into Download Mode:
Press and Hold Volume Down key + Home key + Power key
- Use the USB cable to connect the device to your Computer.
- Wait for a while until Windows detects the device and installs its drivers.
- Look at Odins window and if you see the COM port number of the connected device (0:[COMxx]) then everything is ok.
- Click Start button, And Odin will install the new firmware files into your device.
- During the update process do not try to disconnect the USB cable or stop the operation for any reason.
- After the update is done your phone will reboot.
- If you see PASS! Word at Odins window then the update was successfully done.
- Disconnect the USB cable.
- When the phone is fully on try to do a hard reset by this code *#87976633#
- The phone will reboots one more time, So wait for it.
- Now your Samsung S7710 Galaxy Xcover 2 is up to date, Enjoy your well done job.
Notices:
- After the update you can restore your data backup again (Read How to do it here).
- In case you get one big file (PDA) inside the firmware package then no need to check or use any PIT file, And select that file as PDA.
Huawei modem is a best companion for travelers and tourists who want to use internet while travelling in remote, far flung and urban areas, and it is famous for high speed internet when there is no other chances of availability of net facility. It also helps you much if you are at work location. If your mobile can not work, or permanently dead with the reason of unknown uses.Here we have shared brilliant tool which will help you in rectifying this issue. 