Aston Game

You need these tools. So download them:

Install Nokia Ovi Suite and back up your phone especially your contacts, message etc. In fact, just backup everything because prior to flashing your phone, we need to hard reset it and format your phone memory card to avoid any potential error later on. Hard reset will erase all your contacts, message, phone setting etc. So back them up using Nokia Ovi Suite.

Even if you don�t want to back up your phone, it is essential to install Nokia Ovi Suite for the driver purpose. Otherwise, JAF tool can�t see your mobile phone at later stage.

Format your phone memory card. You can do this using your phone or using a memory card reader. I personally prefer to format my memory card using my own phone. Go to : File Manager / E: Memory Card / Click on Options button / Memory card option / Format.

Next, hard reset your phone. You may achieve this using 2 methods: The first one is type *#7370# (the default security code is 12345) but I prefer the below method (bypass security code):

Okay, now your phone software is good as new.

Now we need to download your phone�s original firmware using NAVIFIRM. Originally, we flash our phone using Ovi Suite or PC Suite right. This suite automatically detects our phone hardware and software then downloads and installs the relevant firmware for our phone automagically. However, for this one we need to manually select and download the right firmware for our phone.

Extract and run NAVIFIRM. Mine is as shown below.

Choose your phone model correctly. As we can see here, there are 3 variant of Nokia 5800XM. The RM-356, RM-427 and RM-428. Different model number use different kind of hardware. So, do not download firmware for RM-427 or RM-428 if your phone model is RM-356. You can check your phone model by typing *#0000#. Look for Type.

�Release�s is firmware version. Ensure that the firmware you are going to flash into your phone (the one you are about to download using NAVIFIRM now) is newer (or at least has same version number) than the one that already in your phone. Downgrading firmware will definitely brick your phone. You may check with your phone firmware by typing *#0000# too. As for my case, my current phone firmware is 51.0.6. So, I have to download �releases� version 51.0.6 or later (in this case, 51.0.6 is the latest one).

Next, choose your phone variant. My Nokia 5800XM is for Malaysian market and has �red lining�. Therefore I chose�APAC1 RED MALAYSIA (0570196)�. If you are not from Malaysia, for example Indonesia and your phone has blue lining, you may want to choose �APAC1 Indonesia BLUE (0559960)� variant.

Finally for the files section. Just tick them all. And press �Download from FiRe� button. Save the files into �Your phone model number� folder. As for my case, I save them into a folder name RM-356 on my Desktop.

There are so many CFWs for Nokia 5800XM out there. To say CFW A is better than CFW B and vice versa is not entirely correct. Different CFW has different goal. Some CFW is more features and function oriented thus this firmware is kinda bloated for some perspective. Some CFW is more speed and performance oriented. So this firmware may be seem too bare for somebody else. In fact, some firmware might be tweaked to the extreme where battery life is no longer a primary concern. Therefore, it is up to you to choose the right firmware for your mobile phone.http://forum.dailymobile.se/index.php?board=84.0 is a good place to start to find the right firmware for your taste.

As for this tutorial, I use Xtension^10 CFW variant 2. You may get it athttp://forum.dailymobile.se/index.php/topic,22786.0.html . I personally prefer this extension due to its performance oriented but not too minimalistic. Having 82 MB free RAMs is a very good thing too. Furthermore, Xtension^10 is based on firmware version 51.0.006. Other Xtension CFWs are based on previous version of Nokia firmware. As we can�t downgrade the phone firmware, it is really important for you to pay special attention here. Do not download CFW that is based on firmware that is older than your current phone firmware and most importantly, the CFW must be based on the firmware version that you previously download using NAVIFIRM. In other word, if you download original firmware version 51 (NAVIFIRM), do not download and use CFW that is based on version 50, 40 or older.

You may download Xtension^10 Variant-2 at http://forum.dailymobile.se/index.php?topic=22786.msg232730#msg232730 .

Custom Firmware doesn�t provide every single file that is needed for your phone. That is why we need to download original firmware using NAVIFIRM before. Same goes to Xtension^10 variant-2. It just provides Rofs2 and Rofs3 files only. So, extract the �ENGLISH ONLY Xtension (rofs2+uda).rar� and �Xtension_10v2.rofs3.rar� into a folder as below.

Then, open up the original firmware folder (the RM-356). Most likely, the files will look like the screenshot below but this is not a must. Different firmware version for different phone model may have different file names.

What we need to do now is change the CFW files name (from Extracted folder) according to your original firmware files name (from RM-356 folder). So as for my case, I need to change �General.uda.fpsx� to be �RM-356_51.0.006_026_000_U01.uda.fpsx�. Err..how do I know? Well, in RM-356 folder, there is only 1 file that end with .uda.fpsx right. In short, the files that I change is as listed below:

The next step is, copy these three files that we already change its name into RM-356 folder (folder that contains original firmware files) and overwrite the original files. The idea is, we want to mix up original firmware�s files with custom firmware�s files. The reason is, custom firmware doesn�t provide every single file that is needed for your phone operating system. The author only supplies 2 or 3 files that he/she modifies. So it is up to us to prepare the additional files that are needed by our phone. That explain why we need to download the original firmware using NAVIFIRM previously.

So, once the 3 original files are overwrote by the custom firmware�s files (that we already change their name), our complete CFW is ready to be transferred into your Nokia 5800XM. Copy the whole folder (RM-356) into �C:Program FilesNokiaPheonixProducts� directory. Or if you are using 64 bit operating system, copy the whole (RM-356) folder into �C:Program Files (x86)Nokiaphoenixproducts�. Refer screenshot below (omit the RM356-0570196� folder, it was automatically created by JAF when I did flash my phone previously).

Please note that the folder (that store our complete CFW) in �phoenixproducts�needs to be named exactly as your phone�s model number. As for my case, my 5800XM�s model number is RM-356. That explains why I use folder nameRM-356.

And for those who are already panic because they can�t find any phoenix folder in Nokia directory�don�t be. By default, there is none. I manually create the �phoenix� folder and �product� folder.

JAF Tools is the software that we will use to transfer your complete CFW into your mobile phone. So, follow the steps below to prepare it. It consist of JAF installation and copy paste 2 files (ini file and PKEY emulator) into JAF installed directory.

Extract �Nokia Flash Tools.rar� (the one you download for JAF and PKey). You will find �JAFSetup_198.62.rar� file, �OGM_JAF_PKEY_Emulator_v 5.rar� and �(.INI FILE)(jaf_nok4models).rar� file. Extract all the 3 files.

Install �JAFSetup_1.98.62.exe� at its default location.

Copy �Jaf_nok4models.ini� and �OGM_JAF_PKEY_Emulator_v 5.exe� into �C:Program FilesODEONJAF� or �C:Program Files (x86)ODEONJAF� if you are using 64 bit operating system.

Then, make a shortcut for �OGM_JAF_PKEY_Emulator_v 5.exe� emulator to your desktop for easy access later on.

If you happen to use Windows Vista or Windows 7 (32 bit or 64bit), you have to change JAF PKey Emulator�s compatibility first. Right click on the JAF Pkey Emulator and choose properties. Click on Compatibility tab and set compatibility mode to Windows XP (Service Pack 3) and set privilege level as Run this program as an administrator as shown in the screenshot below:

Run the JAF Pkey Tool from your desktop.

Ensure the setting as in the screenshot above. Then click GO.

An error box will appear. Don�t worry, just click OK button.

Then, JAF will start. Click on BB5 tab.

visit link download