Aston Game: g2

Showing posts with label g2. Show all posts

Sunday, December 17, 2017

How To Hard Unbricked LG G2 All Variants Fix Qualcomm HS USB QDLoader 9006 mode

After Read This Guide You Will Fix These Situations.

No Recovery Mode.

No Download Mode.

No Boot.

Showing Qualcomm HS-USB QDLoader 9006 mode In Device Manager.

Showing Unknown Device In Device Manager.

Require Tools.

Download Latest SRK Tool From Here

Qualcomm Drivers From Here

Now Solve This Problem.

Step 1.

If Your Phone Show Qualcomm HS-USB QDLoader 9006 mode in Device Manager You Can Skip This Step.

If Your Phone Showing Qualcomm HS-USB QDLoader 9008

And Any Another So Enter Your Phone In 9006 Mode By Follow These Instructions.

If Your Phone Are Not On Qualcomm HS-USB QDLoader 9006 mode So Follow These Instructions To Enter Into Qualcomm Mode.

a) Disassemble Your Phone

b) On Motherboard Navigate "eMMC" Chip. You Can See In Picture.

c) Now Connect USB With Battery Short Cut These Points With Cooper Wire That Shown In Picture Under The eMMc Chip.

d) Now Your Device Shows In Device Manager As "Unknown Device" Then Install Drivers Which Given In Tools Section.

e) Your Device Will Shows Up.

Step 2.

1 : Download And Extract SRK Tool.

2 : Run SRK Tool.

3 : Press 4 Then 5.

4 : Select Your Device Model Number.

5 : Now Y For Yes, Then Again Y.

6: Then Disk Management Windows Pop-Up Then Select Disk Number Will Shows After Connecting Your Phone.

Note : Select Chose Correct Disk Which Shows lots Of Paritions.
7: Then Enter Disk Number.
8: Then Press Y And Wait
9: After Complete Your Phone Can Boot Into Download Mode.
10 : Then Boot into Download Mode And Flash kdz/tot File.
11 : Finished.... :)

visit link download

How To Root Unroot LG G2 All Variants In Easy Safe Way

Hello Fandroids, this is a step by step tutorial to show Rooting and Unrooting of LG G2 in all variants. This tutorial show you a safe method to root and unroot your LG G2 without a data loss and without harming your device unless you will do something wrong during following my instructions. Dont use rooting to pirate applications and games, only use it for productive work. I am showing you this tutorial, because lot of people are worried about LG G2 software keys and they want to hide them to take a full advantage of LG G2 display while playing games and watching movies on their G2 . However rooting helps you to overclock CPU speed as well as many other things. But to keep it simple stay with the basics.

HOW TO ROOT

Before starting rooting process you dont have to make a backup of your device because this will not wipe a data from your phone just simply follow below instruction to get root access on your phone

STEP 1

Download a VRoot Tool Kit to Root your LG G2 and install it on your PC from a below link

http://cdnpic.mgyun.com/files/products/vRoot/2013/17235968/VRoot_1.7.0.3882_Setup.exe

STEP 2

Now you have to get in to your phone setting like a below picture and you have to select General

Press About Phone from General and you will see a window like a below picture

Now press Software Information and you will see a below picture like window on your phone

Now here you have to hit Build Number may be 5 or 6 times repeatedly because it will give us developer options like below picture in General

Now enter in to developer options and Enable USB Debugging like a Below Picture

STEP 3:

Now open up a Vtool Kit that you have installed in Step 1 in your PC and it will look like a below picture

Here all the things are written in Chinese, but dont get worried just simply connect your phone with your PC using a micro usb cable which comes up with the phone and you will see a window like below picture on your phone and you have to press ok here

Vroot Kit will show you your LG G2 logo like a below picture in it when you press ok in your phone

Now just simply click root and enjoy a full root on your device

Now once it rooted your phone get restarted and you will see Super Su in your device like a below picture that means you have successfully rooted your device.

So guys now you have super user installed on your device and you can download GMD Auto Hide Soft Keys from play store to hide your software keys like a below picture,you just have to grant access to super su once you open GMD and then you can easily hide your software keys.

HOW TO UNROOT

Before starting a Unrooting process make sure you have made a full back up of your phone so you will not loose any data because unrooting will wipe all the things on your phone except you external sd card files.

STEP 1:

Download LG Software Update Tool Kit from LG site from a below Link and install it on your computer:

http://www.lg.com/uk/support/mobile-support

After installing it open it and connect your phone with your PC so it will install all the neccessary drivers in to your PC , if all the drivers get installed properly you see a window like below picture on your PC with LG G2 logo display on LG Software Tool and you have to enable a LG Software option in your phone by dropping down a notification bar and selecting a USB connected option

If still you wouldnt able to download drivers then close Lg Software Tool and download them manually from this link : http://storagecow.eu/index.php?dir=Xda%2FLG+Optimus+G+Pro%2FPrograms%2F

STEP 2

Download LG G2 Flashing tool kit from a below link and extract it using a Winrar

http://www.putlocker.com/file/391864CF903B8C71

After downloading this file you have to download a stock firmware for your device from a link below

http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2F

This site look like a below picture and you have to download a correct firmware for you LG G2 variant

After downloading firmware make sure your phone is not connected with the PC because we are going to turn off our phone to get in to a downloading mode. Turn off your phone now and once its get completely off Hold Volume Up Key + Insert a Micro USB cable in to your phone until you will see a below picture on your phone

Now get into Flash Tool and open UpTestEX like a below picture

Now we have Openned R&D Test Tool window and here we have to adjust some of the things. In Select Type Field we have to choose 3GQCT (top left hand side) and In Phone Mode we have to choose DIAG (top right hand side). Now lastly you have to select a stock firmware of your LG G2 which you have download by pressing Select kdz file. Once all these things selected they will look like a below picture.

Now press Normal web upgrade test which is appearing at bottom right hand side of R& D tool. You will see another window like below picture and once you see it press Upgrade Start

Now finally window like below picture pop out from your pc

Now press ok and software installation will be started if you see any error msgs on your pc ignore them and keep the process going on until your phone get fully update (this process is going to take little bit of more time as you are installing a stock firmware on your LG G2). Phone will also take its time to boot up a system because its installing all the new things.

After following these steps all of you can easily root and unroot your LG G2, if you have any questions just leave your comments here.

Video Tutorial Link:

https://www.youtube.com/watch?v=oAgfRpbNK6c

visit link download

How to Root Motorola G2 nd gan XT1063 XT1068 5 0 2 Rooting TWRP v2 4 8 0

Credits : XDA Developers
Credits : @Chainfire for Auto-Root
Credits : @luca020400 for TWRP

Greetings my dear friends,

[TESTED ON WINDOWS 7/8/8.1]
I have made this tutorial for those users who want to root and install custom recovery like CWM/TWRP/PhilZ on their phones running on 5.0.2 Official Stock ROM. I have tried the conventional rooting method.
Download SuperSU Zip + TWRP image + Fastboot drivers > Boot into Fastboot Mode > Type fastboot flash recovery TWRP.img > Boot into TWRP > Select SuperSU zip > Flash zip > Reboot.
Unfortunately this fails in Lollipop 5.0.2. The reason is there is a script file in /system directory recovery-from-boot.p that gets executed everytime amd that flashes stock recovery after every boot. So what happens is, after flashing TWRP and booting into recovery mode, the TWRP doesnt get booted up. Instead stock recovery gets flashed. Chainfire has made a working root method to root the phone.

How does it work?
The zip contains a modified kernel (boot image) that is booted up temporarily and pushes the SU apk and SU binary into /system. After the files are pushed and the permissions are set, the phone reboots. So here the phone is 1st rooted and then TWRP is flashed via Flashify app. This method can also be used to flash other recoveries like CWM/PhilZ.

Warning:
1. For those users who have their bootloader LOCKED, this will unlock the bootloader and void your WARRANTY !
2. After unlocking the bootloader your phone will be erased. Your installed apps and data in internal storage will be wiped !
3. Before proceeding make sure you backup your apps. contacts, SMS and move your data from internal storage to external storage like sdcard or PC.
4. For those users who have their bootloader already unlocked need not worry as this process wont wipe anything from the device.
You need:
1. Chainfire Auto-Root Zips

[XT 1063] titan_retuglb : Download
[XT 1068] titan_retailde : Download
[XT 1068] titan_retaildsds : Download

2. TWRP[All Variants] v2.4.8.0 : Download
3. Motorola PC Drivers

To root your phone follow these steps:

Step 1: Go to Settings > About Phone > System Version. Note down your phone model name from the text.
Step 2: Else from ES File Explorer go to /system/build.prop and open it. Scroll down and find the line ro.product.name= and note down your phone model name.
Step 3: Download the appropriate zip file corresponding to your phone model name.
Step 4: Extract the zip on the desktop.
Step 5: Switch off the phone & enter into Fastboot mode by pressing & holding down Volume Down Key and Power Key together and releasing it after 3-4 seconds.
Step 6: Connect the phone to the PC via USB Cable.
Step 7: Go to the extracted zip folder and run the root-windows.bat file.
Step 8: Follow the instructions in the command window.
Step 7: After this is done, your phone will reboot and you will see BOOTLOADER UNLOCKED in red text.
Step 8: After booting completely, open App Drawer, you will see SuperSU app installed.
Step 9: Download Root Checker app from the Google Play Store to confirm.

TWRP Installation Steps:

Step 1: Download the TWRP recovery image file.
Step 2: Download Flashify app from the Google Play Store
Step 3: Open it Click on Accept and then grant SuperSU access. Go to Backup/Restore Tab and backup your current stock recovery.
Step 4: Go to Flash Tab, select Recovery Image, choose file and select the directory of downloaded TWRP image and select File Way and finally select Yup!
Step 5: After flashing is complete, click on Reboot Now to boot into TWRP

Congratulations ! You have successfully rooted and flashed TWRP recovery on your phone.
SUCCESS :-) N

visit link download

Aston Game

Sunday, December 17, 2017

How To Hard Unbricked LG G2 All Variants Fix Qualcomm HS USB QDLoader 9006 mode

How To Hard Unbricked LG G2 All Variants Fix Qualcomm HS USB QDLoader 9006 mode

After Read This Guide You Will Fix These Situations.

Require Tools.

Now Solve This Problem.

Step 1.

Step 2.

Friday, December 8, 2017

How To Root Unroot LG G2 All Variants In Easy Safe Way

How To Root Unroot LG G2 All Variants In Easy Safe Way

Wednesday, December 6, 2017

How to Root Motorola G2 nd gan XT1063 XT1068 5 0 2 Rooting TWRP v2 4 8 0

How to Root Motorola G2 nd gan XT1063 XT1068 5 0 2 Rooting TWRP v2 4 8 0