Friday, December 15, 2017
How to make Crankshaft in Autocad Advanced Tutorial
How to make Crankshaft in Autocad Advanced Tutorial
In this tutorial you will learn Tutorial how to make Crankshaft. This is on categories advanced tutorial. You can learn tutorial step by step and more easly. so let us start.
-
Step 1
open a sketch on the right plane and draw a sketch like shown
-
Step 2
open a sketch on the body. draw a 30mm radiused circle and extrude it 20mm
-
Step 3
use revolve command
-
Step 4
go to other side draw shown sketch and extrude it 20 mm
-
Step 5
open a sketch on same surface and draw shown skecth
-
Step 6
use cut extrude command and tick filp side to cut
-
Step 7
now use mirror command. your crank began to take shape
-
Step 8
use move copy body command. enter volues
-
Step 9
rotate this (4th from right side) body 60degree
-
Step 10
rotate 3th body 120 degree
-
Step 11
rotate sixth body 180 degree
-
Step 12
rotate second body 240 degree
-
Step 13
rotate 5th body 300 degree
-
Step 14
use combine command. your crank is ready for now. we will add oil canal and other parts after
Now the tutorial How to make Crankshaft in Autocad has been finished. If you need any tutorial to improve your skill in autocad please visit other tutorial on this blog. Ok thanks for coming.
By Aykut Dana
