Wednesday, December 6, 2017
How to Install a Stock Rom LG using KDZ Guide
How to Install a Stock Rom LG using KDZ Guide
How to Install a LG using KDZ Stock Rom Firmware Guide
Attention
We Stock Rom are not responsible for any damage to the devices. The responsibility rests with the user entirely. For more information, please read the Terms of site HERE . Note: . Read carefully, do not ignore any part of the procedure Make sure your device has enough power to make the whole process, at least 60%.
For the device to be recognized by the PC, you must have installed drives.
On the device has the program "LG PC Suite IV it is the SD card.
With this program, if you prefer, you can synchronize and
back up phone data.
Install Lg Pc Suite on your computer to continue.
If you prefer to download the LG website click here >>> Lg PC Suite.
Before the process, enable USB debugging mode.
Settings> Applications> Development.
Important
To successfully finalize process, disable the "Virtual Modem LGE".
Control Panel> System> Hardware> Device Manager> Modems
Click right on LGE Virtual Modem and then click Disable.
Files needed
1 - KDZ UPDATE EN.
2 - Stock Rom referring to your device
Let the process
1 - Run the file KDZ_FW_UPD.exe
In Type, you will leave the 3GQCT option in Phone Mode, select DIAG.
2 - Connect your phone to the PC, wait for it to be recognized.
3 - In KDZ File, locate the Stock Rom. (Stock rom with .kdz extension)
4 - Press the "Start software update" or "Launch software update" button.
5 - Wait for the end of the process.
READY!
In about five minutes the phone will start with the new firmware.
If the unit is restarting the LG logo,
Reconnect your device holding the volume down key + power button, soon then your device will enter Hard Reset mode and restart.
